Part Finder  

1x Chainsaw 404 063 190DL Five Hyper Skip Tooth Chain Ripping 10 Degree Semi Chisel for Lucas Mill

SPECIFICATIONS:

  • Type Semi Chisel Skip Tooth Ripping
  • Pitch 404"
  • Gauge .063"
  • Drive Links 190
  • Cutting angle: 10°
  • Bar length 60"

Replaces Oregon Part Number 27RX 190

 

What is skip tooth and ripping chain?

 

Skip tooth chain is a chain that has a certain number of cutting teeth missing. It is designed to allow for added chip clearance on longer bars. It also serves to reduce the pressure on the power head when using a long bar. Fewer cutting teeth require less power to operate.

Skip tooth can also be used on dirty woods like stringy bark to help clear the cutters more efficiently.

Be aware that it can result in “chatter” if used on very short bars as there are less teeth to engage the wood.

 

Ripping chain is a regular chain set with a ten-degree sharpening angle. It is not able to be used for cross cutting. It must be used for cutting with the grain.

It is most commonly used for slabbing or ripping posts. It creates a smoother cut than standard chain. Standard cross cutting chain has a 25-35 degree cutting angle.

Ripping chain puts enormous pressure on the powerhead so it is usually recommended for use with a stationary engine.

If a chainsaw is being used with ripping chain then we also recommend using a shorter bar with a skip tooth chain.

SKU 190SLAB16
Model # 190SLAB16
Brand Hurricane
Shipping Weight 1.4000kg
Shipping Width 0.050m
Shipping Height 0.050m
Shipping Length 0.050m
Shipping Cubic 0.000125000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Jono & Johno PTY LTD users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category