SKU : Earthrodkit-
If you are setting up an electric fence then your earthing system is something you should pay careful attention to.
If your earthing system is set up incorrectly then you won’t generate sufficient shock to keep your animals in or out of your enclosure.
This Jono & Johno earth system consists of three copper-plated earth rods, 3 easy to use brass clamps and 15 meters of 2.5mm insulated lead out wire. The 2.5mm measurement is for the aluminium wire and does not include the plastic coating.
You should ensure that your lead out wire is equal to or greater in diameter than the total wire component of your electric fence wire.
The earth rods are designed with optimum conductivity in mind. They are made from stainless steel with a copper coating.
Each rod has a clamp attached to secure your lead out wire. Ensure you strip back the plastic coating on the lead out wire at the point where the clamp will make contact.
Insert the earth rods approximately 80cm into the earth, leaving 20cm exposed.
We recommend placing your earth rods within 25m of your energiser. You should place the earth rods in as wet an area as possible, with a spacing of approx. 5m between each rod.
We recommend using three earth rods for electric fence systems that run over a distance greater than 1km. Three earth rods will ensure maximum conductivity for only a marginal extra cost.
You can pour water around the earth rods to keep the ground moist. If the earth is particularly dry or sandy then you can consider running an earth wire through your electric fence. This is an alternative method for setting up an electric fence which will eliminate the variability associated with dry conditions.
Jono & Johno offers a 12-month warranty on all products. Warranty period is 12 months for the home user and 6 months for commercial use.
We pride ourselves on selling good quality kit and will be fair and prompt honouring our warranties. If you’re in trouble, we’ll help you out.
WHAT IS COVERED?
Exactly what is covered by warranty will depend on 2 things:
Minor faults caused by user - Parts will be supplied for repair at user expense.
Minor faults caused by manufacturer - Parts will be supplied for repair, with instructions provided by us on how to carry out repair. If the repair is time consuming in nature, you can contact Jono & Johno to discuss labour cost compensation.
Major faults caused by manufacturer - Jono & Johno will facilitate a return of the product for refund or replacement at our expense. Or if you’d prefer (at our discretion and in consultation with you), we can send appropriate parts and compensate labour costs if you can carry out the repair yourself.
Major faults caused by user - Where possible parts will be supplied at user expense. Where the item cannot be repaired by the user, Jono & Johno will offer to have the item returned for repair at user expense. Our workshop rate is $60 per hour.
HOW DO I RETURN MY PRODUCT IF IT’S COVERED BY WARRANTY?
If you’re in reasonable driving distance of a Jono and Johno outlet, you can physically return the product yourself. Please contact us in advance to arrange a return authority.
If you are not within reasonable driving distance, Jono & Johno will provide you with a return authority and an address to return the product to. Where Jono & Johno is at fault a postage-paid return label will be provided.
EXCEPTIONS TO THE RULE
If your product is out of warranty and is buggered, even though you’ve hardly used it, give us a call or shoot us an email. If there is a manufacturer fault or the item should have lasted a lot longer than it has, we’re happy to assess it outside of the warranty period. We do this on a case-by-case basis.
|Brand||JONO & JOHNO|