SKU : THST40x2
Stone size: 5/32'' (4.0mm) - Can be used on 3/8'' Low Profile Chainsaw chains
Can be used to sharpen carbide (tungsten) chain!
Useable material area lenght: 0.79" (20mm)
Shaft diameter: 2.95mm
Lasts 5 times longer
Grit: #150
Faster cutting
Non-Glazing
Keeps Form
Less Dust
This listing is for 6 stones
THESE STONES ARE SUITABLE FOR SHARPENERS WITH A THREADED SHAFT AND STRAIGHT SHAFT GRINDERS.
These stones are intended for use with Jono and Johno chainsaw sharpeners, they will also fit Oregon, Craftsman, Dremel and Wen straight shaft sharpeners with a shaft diameter of 2.95mm. Refer to the sharpeners instructions for correct stones.
Jono & Johno offers a 12-month warranty on most products.
We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.
The exact warranty coverage depends on two factors:
Minor faults caused by the user
Minor faults caused by the manufacturer
Major faults caused by the manufacturer
Major faults caused by the user
If you need to return your product:
Some products are not covered by warranty, including:
If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.
SKU | THST40x2 | |
Model # | THST40x2 | |
Barcode # | 681087038720 | |
Brand | JONO & JOHNO | |
Shipping Weight | 0.1000kg | |
Shipping Width | 0.050m | |
Shipping Height | 0.050m | |
Shipping Length | 0.050m | |
Unit Of Measure | ea | |
Items included in the kit | ||
Product Name | Quantity | SKU |