SKU : CM032
Need extra lubrication on your chainsaw milling setup? This Jono & Johno Oiler Kit for chainsaw mill is designed to provide extra bar and chain lubrication on chainsaw milling attachments. It is used to inject bar oil into the groove at the working end of the chainsaw bar.
Oil flow is gravity fed and controlled by a ballcock valve on the tank. The auxiliary Oiler Kit will help extend saw bar life, achieve cooler cutting and will prevent early bar and chain wearing.
To be used with double ended bars larger than 36". Can also be used on single ended bars but two holes must be drilled in the saw bar tip (two holes are needed if you will be flipping the bar over at any stage).
Your cutter bar will require a hole to be drilled through it to utilise the oiler kit. There is a video link below that demonstrates how to do this. This process can damage your bar if not carried out correctly.
Jono & Johno offers a 12-month warranty on most products.
We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.
The exact warranty coverage depends on two factors:
Minor faults caused by the user
Minor faults caused by the manufacturer
Major faults caused by the manufacturer
Major faults caused by the user
If you need to return your product:
Some products are not covered by warranty, including:
If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.
SKU | CM032 | |
Model # | CM032 | |
Barcode # | 682157254903 | |
Brand | JONO & JOHNO | |
Shipping Weight | 0.6000kg | |
Shipping Width | 0.170m | |
Shipping Height | 0.240m | |
Shipping Length | 0.170m | |
Shipping Cubic | 0.006936000m3 | |
Unit Of Measure | ea |