Chainsaw Clutch Removal Demount Tool for Baumr-ag SX38 SX45 SX52 SX62 SX66 SX75 MTM 58SX 72SX

Clutch removal demount tool and piston stop — everything you need to get a chainsaw clutch off.

Chainsaw clutches are tightened by the engine itself and have a reverse thread, so they cannot be removed with ordinary tools. This set gives you both parts of the job: a piston stop to lock the engine, and a three-prong demount tool that grips the clutch so you can turn it off cleanly.

What you get:

1x clutch expander demount tool
1x piston stop plug

Does not include a replacement clutch.

Suits:

Brand	Models
Baumr-Ag	SX38 38cc - SX45 45cc - SX52 52cc - SX62 62cc MKI MKII MKIII - SX66 66cc - SX75
MTM	58SX - 72SX

If your saw isn't listed, get in touch before ordering and we'll check it for you.

How to use it:

Remove the spark plug and screw the piston stop into the plug hole
Spin the clutch to rotate the engine until the piston comes up against the stop
Sit the demount tool on top of the clutch so the three prongs drop into the matching holes and the base sits flat and even on the clutch
Using a 19mm socket or spanner on the tool, turn clockwise to undo the clutch

Remember the clutch has a reverse thread — it undoes clockwise, not anticlockwise. Forcing it the wrong way is the most common way people damage a clutch or a crankshaft.

Please note:

Take the piston stop out before starting the saw.

WARRANTY OVERVIEW

Jono & Johno offers a 12-month warranty on most products.

We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.

WHAT IS COVERED?

The exact warranty coverage depends on two factors:

Whether the fault is due to user error or a manufacturer defect
Whether the fault is minor or major

Minor faults caused by the user

Parts will be supplied for repair at the user's expense.

Minor faults caused by the manufacturer

Customers are expected to perform basic repairs as part of our warranty process.
Jono & Johno will provide replacement parts and instructions for simple repairs, such as installing a recoil starter.
Jono & Johno will determine whether a fault is classified as minor.
If unsure about a repair, contact us, and we’ll assist you.

Major faults caused by the manufacturer

Jono & Johno will arrange a return, refund, or replacement at our expense.
If preferred (and at our discretion), we may provide replacement parts and contribute to labour costs if you can perform the repair.

Major faults caused by the user

Where possible, parts will be supplied at the user's expense.
If the item cannot be repaired by the user, we offer repairs at our workshop at $80 AUD per hour.
The customer will need to cover return shipping costs for user-related faults.

RETURN PROCESS & SHIPPING COSTS

If you need to return your product:

In-store return: If you're near a Jono & Johno outlet, you can return the product in person. Contact us first to arrange a return authority.
Shipping return: If you are not within driving distance, we will provide a return address.
- If the fault is due to a manufacturer defect, we’ll cover return costs.
- If the fault is user-related, the customer is responsible for return shipping.

EXCEPTIONS TO THE RULE

Some products are not covered by warranty, including:

Engines used in go-karts and stump grinders

OUT-OF-WARRANTY PRODUCTS

If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.

SKU	LCTCEDT01G
Model #	LCTCEDT01G
Barcode #	682157262878
Brand	JONO & JOHNO
Shipping Weight	0.3000kg
Shipping Width	0.115m
Shipping Height	0.040m
Shipping Length	0.163m
Unit Of Measure	ea
Assembled Length	0.163m
Assembled Height	0.040m
Assembled Width	0.115m