Clutch Removal Tool Piston Stop & Lever Bar for 70cc Perla Barb Chainsaw V1 V2

Clutch removal tool, piston stop and lever bar — everything you need to get the clutch off a 70cc Perla Barb chainsaw.

Chainsaw clutches are tightened by the engine itself and have a reverse thread, so they cannot be removed with ordinary tools. This set gives you all three parts of the job: a piston stop to lock the engine, a removal tool that engages the clutch, and a lever bar for the leverage to break it loose.

What you get:

1x clutch removal tool
1x piston stop plug
1x lever bar

Does not include a replacement clutch.

Suits:

Brand	Models
Perla Barb	70cc V1 - 70cc V2

Fits both the V1 and V2 versions of the 70cc saw. If your saw isn't listed, get in touch before ordering and we'll check it for you.

How to use it:

Remove the sprocket cover from the saw
Remove the spark plug and screw the piston stop into the plug hole
Spin the clutch to rotate the engine until the piston comes up against the stop
Fit the removal tool onto the clutch so it seats squarely
Slide the lever bar through the hole in the tool to give yourself leverage
Turn clockwise to undo the clutch

Remember the clutch has a reverse thread — it undoes clockwise, not anticlockwise. Forcing it the wrong way is the most common way people damage a clutch or a crankshaft.

Please note:

Take the piston stop out before starting the saw.

WARRANTY OVERVIEW

Jono & Johno offers a 12-month warranty on most products.

We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.

WHAT IS COVERED?

The exact warranty coverage depends on two factors:

Whether the fault is due to user error or a manufacturer defect
Whether the fault is minor or major

Minor faults caused by the user

Parts will be supplied for repair at the user's expense.

Minor faults caused by the manufacturer

Customers are expected to perform basic repairs as part of our warranty process.
Jono & Johno will provide replacement parts and instructions for simple repairs, such as installing a recoil starter.
Jono & Johno will determine whether a fault is classified as minor.
If unsure about a repair, contact us, and we’ll assist you.

Major faults caused by the manufacturer

Jono & Johno will arrange a return, refund, or replacement at our expense.
If preferred (and at our discretion), we may provide replacement parts and contribute to labour costs if you can perform the repair.

Major faults caused by the user

Where possible, parts will be supplied at the user's expense.
If the item cannot be repaired by the user, we offer repairs at our workshop at $80 AUD per hour.
The customer will need to cover return shipping costs for user-related faults.

RETURN PROCESS & SHIPPING COSTS

If you need to return your product:

In-store return: If you're near a Jono & Johno outlet, you can return the product in person. Contact us first to arrange a return authority.
Shipping return: If you are not within driving distance, we will provide a return address.
- If the fault is due to a manufacturer defect, we’ll cover return costs.
- If the fault is user-related, the customer is responsible for return shipping.

EXCEPTIONS TO THE RULE

Some products are not covered by warranty, including:

Engines used in go-karts and stump grinders

OUT-OF-WARRANTY PRODUCTS

If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.

SKU	70ccPBV1-CRT
Model #	70ccPBV1-CRT
Barcode #	726597608190
Brand	Perla Barb
Shipping Weight	0.5500kg
Shipping Width	0.050m
Shipping Height	0.050m
Shipping Length	0.050m
Shipping Cubic	0.000125000m3