Chainsaw Bar Sprocket Nose Tip for Tsumura 48PV35 404 063 Gauge 10 Tooth

Genuine Tsumura replacement sprocket nose tip — part number 48PV35

Bring a worn Tsumura bar back to life. The nose sprocket is the part that wears out first on a replaceable-tip bar, and swapping it is far cheaper than replacing the whole bar. Made in Japan.

Specifications:

Spec	Detail
Tsumura part number	48PV35
Pitch	.404"
Gauge	.063"
Teeth	10
Rivets	3 rivets included
Made in	Japan

Suits:

Tsumura replaceable-nose guide bars in .404" pitch - .063" gauge. If your bar takes a different pitch or gauge, you need a different nose — get in touch with your bar details and we'll point you to the right one.

Make sure you have the right nose:

We stock several .404" nose tips and they are not interchangeable — each is made for a particular brand of bar.

If you have	You need
Tsumura bar	This nose — 48PV35
Oregon or Hurricane Pro bar	5 pin .404 nose tip
GB Titanium bar	GB .404 063 nose tip

Fitting it:

This is a workshop job rather than a field repair, but it's straightforward with the right tools:

Drill or punch out the three rivets holding the old nose
Slide the old nose out and fit the new one
Place the rivets through the mounting holes
Peen the rivet heads flat with a ball-peen hammer, working against a heavy, solid surface such as an anvil or vice

The rivets are included, so there is nothing else to buy.

Take your time peening — the rivets need to be properly flattened to hold the nose securely under load.

WARRANTY OVERVIEW

Jono & Johno offers a 12-month warranty on most products.

We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.

WHAT IS COVERED?

The exact warranty coverage depends on two factors:

Whether the fault is due to user error or a manufacturer defect
Whether the fault is minor or major

Minor faults caused by the user

Parts will be supplied for repair at the user's expense.

Minor faults caused by the manufacturer

Customers are expected to perform basic repairs as part of our warranty process.
Jono & Johno will provide replacement parts and instructions for simple repairs, such as installing a recoil starter.
Jono & Johno will determine whether a fault is classified as minor.
If unsure about a repair, contact us, and we’ll assist you.

Major faults caused by the manufacturer

Jono & Johno will arrange a return, refund, or replacement at our expense.
If preferred (and at our discretion), we may provide replacement parts and contribute to labour costs if you can perform the repair.

Major faults caused by the user

Where possible, parts will be supplied at the user's expense.
If the item cannot be repaired by the user, we offer repairs at our workshop at $80 AUD per hour.
The customer will need to cover return shipping costs for user-related faults.

RETURN PROCESS & SHIPPING COSTS

If you need to return your product:

In-store return: If you're near a Jono & Johno outlet, you can return the product in person. Contact us first to arrange a return authority.
Shipping return: If you are not within driving distance, we will provide a return address.
- If the fault is due to a manufacturer defect, we’ll cover return costs.
- If the fault is user-related, the customer is responsible for return shipping.

EXCEPTIONS TO THE RULE

Some products are not covered by warranty, including:

Engines used in go-karts and stump grinders

OUT-OF-WARRANTY PRODUCTS

If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.

SKU	11011
Barcode #	682157258307
Brand	Tsumura
Shipping Weight	0.2000kg
Shipping Width	0.100m
Shipping Height	0.010m
Shipping Length	0.163m
Shipping Cubic	0.000001000m3
Assembled Length	0.163m
Assembled Height	0.010m
Assembled Width	0.100m