Portable Log Horse with Chainsaw Holder

Cut a season's worth of firewood without the backache.

The Jono & Johno Portable Log Horse holds both your timber and your chainsaw at a proper working height, so you can stop bending over logs on the ground and start cutting block after block in one smooth rhythm.

Clamp your chainsaw bar into the holder, secure it in the protective sheath, then feed timber along the V-shaped tray and cut to length. No lifting, no repositioning, no restarting the saw between every cut. Slide the log through, line it up against the adjustable measuring bar, and cut again — every block the same length, ready for splitting, stacking or the fireplace.

The chainsaw holder mounts on either side of the frame, so it works whether you're left or right handed. When you're done, the whole unit folds flat for the shed, trailer or ute.

Built from galvanised metal to live outdoors year-round — it shrugs off rust and weather.

Requires a minimum 16" chainsaw bar. Fitment may vary by chainsaw model. Chainsaw shown in photos is not included.

Features

Chainsaw holder and heavy-duty clamp — locks the bar in position and supports the weight of most major brand chainsaws
Protective sheath — shields the chain while the saw is mounted
V-shaped log tray — supports timber and lets logs slide through for repeat cuts
Adjustable measuring bar — consistent block lengths, cut after cut
Ambidextrous mounting — holder fits either side of the frame
800mm working height — saves your back compared with cutting on the ground
Galvanised metal construction — built for outdoor use
Foldable frame — packs down for storage and transport
120kg maximum capacity

Specifications


Bar compatibility	Minimum 16" chainsaw bar required
Maximum weight capacity	120kg
Log tray length	760mm
Total length including clamp	890mm
Log tray width	275mm at widest point of V
Working height	800mm from ground to top of V
Footprint width	720mm with legs fully expanded
Overall dimensions	795mm x 800mm x 815mm
Construction	Galvanised metal
Chainsaw holder position	Mounts on either side

Package Includes

1 x Portable log horse / saw bench
1 x Chainsaw holder and clamp assembly
1 x Protective sheath
1 x Adjustable measuring bar

Chainsaw not included.

Important Safety Information

Always read and follow the instructions before use.
Always wear appropriate PPE, including eye protection, hearing protection, gloves, chainsaw chaps and suitable footwear.
Ensure the chainsaw is correctly fitted and securely clamped before operation.
Use only on firm, level ground.
Do not exceed the 120kg maximum weight capacity.
Keep hands, loose clothing, children, pets and bystanders clear of the cutting area.
Check all fasteners, clamps and fittings before each use.
Do not use with an incompatible chainsaw or a chainsaw that cannot be securely mounted.

WARRANTY OVERVIEW

Jono & Johno offers a 12-month warranty on most products.

We pride ourselves on selling good quality gear and will be fair and prompt in honouring our warranties. If you’re in trouble, we’ll help you out.

WHAT IS COVERED?

The exact warranty coverage depends on two factors:

Whether the fault is due to user error or a manufacturer defect
Whether the fault is minor or major

Minor faults caused by the user

Parts will be supplied for repair at the user's expense.

Minor faults caused by the manufacturer

Customers are expected to perform basic repairs as part of our warranty process.
Jono & Johno will provide replacement parts and instructions for simple repairs, such as installing a recoil starter.
Jono & Johno will determine whether a fault is classified as minor.
If unsure about a repair, contact us, and we’ll assist you.

Major faults caused by the manufacturer

Jono & Johno will arrange a return, refund, or replacement at our expense.
If preferred (and at our discretion), we may provide replacement parts and contribute to labour costs if you can perform the repair.

Major faults caused by the user

Where possible, parts will be supplied at the user's expense.
If the item cannot be repaired by the user, we offer repairs at our workshop at $80 AUD per hour.
The customer will need to cover return shipping costs for user-related faults.

RETURN PROCESS & SHIPPING COSTS

If you need to return your product:

In-store return: If you're near a Jono & Johno outlet, you can return the product in person. Contact us first to arrange a return authority.
Shipping return: If you are not within driving distance, we will provide a return address.
- If the fault is due to a manufacturer defect, we’ll cover return costs.
- If the fault is user-related, the customer is responsible for return shipping.

EXCEPTIONS TO THE RULE

Some products are not covered by warranty, including:

Engines used in go-karts and stump grinders

OUT-OF-WARRANTY PRODUCTS

If your product is out of warranty and has failed despite minimal use, contact us. We may assess it on a case-by-case basis. If a manufacturer defect is identified, we aim to be fair in resolving the issue—but this is at our discretion.

SKU	LHWCM
Model #	LHWCM
Barcode #	682157255153
Brand	JONO & JOHNO
Shipping Weight	11.4000kg
Shipping Width	0.260m
Shipping Height	0.090m
Shipping Length	0.910m
Shipping Cubic	0.021294000m3
Unit Of Measure	ea